bristol, pa 19007-6810 usa tel (215) 781-9956 ? fax (215) 781-9845 printouts of this document may be out of date and should be considered uncontrolled ? info@arieselec.com www.arieselec.com features ? d esigned to allow user to cut 32-position adapter down to any size desired. ? p ins are mechanically fastened and soldered to board using aries patented process, creating a reliable electrical connection and rugged contact. general specifications ? a dapter body: fr-4 with 1-oz. cu traces ? p ads: bare cu protected with entek ? by enthone or immersion white sn to eliminate coplanarity concerns and solder bridges associated with hot air solder leveling ? p ins: brass 360 1/2-hard per uns c36000, astm b16/b16m ? p in plating: 200 [5.08] sn/pb 93/7 per astm b579-73 over 100 [2.54] ni per sae ams-qq-n-290 ? o perating temperature: 221f [105c] mounting considerations ? suggested pcb hole size : 0.028 0.003 [0.71 0.08] dia. ? w ill plug into standard ic sockets 18041 rev. aa series 655000 tsop-to-dip 0.600 [15.24] adapter ordering information 32-655000-10 32-655000-10-p for panelized version customization : in addition to the standard products shown on this page, aries specializes in custom design and production. special materials, platings, sizes, and configurations can be furnished, depending on the quantity. note : aries reserves the right to change product general specifications without notice. all dimensions: inches [millimeters] all tolerances: 0.005 [0.13] unless otherwise specified consult factory for other sizes and configurations
|